- Input Table :
- Output Table (at 40oC) :
- Inrush Current (ACE723A/B) :
Not exceed 15A@115V AC or 30A@230V AC
- Ripple and Noise :
Less than 100mV
- Line Regulation :
The line regulation for each outputs are less than +/-1%,
while measuring at rated loading and +/-10% of input voltage changing
- Load Regulation :
Less than +/-1%@+/-5V and -12V, +/-4%@+12V and +24V
(ACE723B)
- Efficiency :
Higher than 75%
- Hold-up Time (ACE723A/B) :
20ms (typical)@115V AC
- Protection :
Over voltage protection. The trip point is around 5.9V ~
7.0V output
- Thermal Protection :
Built in 110+/-5șC thermal switch in HS1
- Altitude :
0 ~ 10,000ft
- Vibration :
10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
- Impact :
10G for 20ms once on each X, Y and Z axis
- Hi-pot isolation :
- 4300V DC, input to output for one minute
- 2200V DC, input to ground for one minute
- MTBF :
- ACE723A : 206,500 Hours
- ACE723B : 206,300 Hours
- ACE723T : 206,700 Hours
- ACE723C : 205,900 Hours
- Safety :
Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN 60950
- EMI :
Meets FCC docket 20780 curve "A",
EN50081-2 : CISPR22 "A"
- EMS Standard
(Designed to meet the following limits) :
- EN 50082-2
- IEC 801-1 8KV (Air Discharge) criteria B
- IEC 801-3, 10V/M criteria A
- IEC 801-4, 2KV criteria B
- IEC 801-5, 2KV criteria B
- Built-in cooling fan
- Operating Temperature :
-20șC ~ 70șC
(Derating curve will occur 50șC ~ 70șC)
- Storage Temperature :
-20șC ~ 85șC
- Dimensions :
112(W) x 51(H) x 203(D)mm; (4.4" x 2" x 8")
|
|
- ACE723A
Rugged AC input 230W power supply
- ACE723B
Rugged AC input 230W PC and +24V power supply
- ACE723T
Rugged 48V DC input 230W power supply
- ACE723C
Rugged 24V DC input 230W power supply
|
E-Mail
