Power Fault Warning:
In case one power module failed, the buzzer and LED will act. After pushing
reset button, the buzzer stops and the LED still light until the failed
power module is fixed.
ACER23A 230W Redundant Power Module
- Input :
90V to 130V AC or 180V to 260V AC selectable
- Output (Max. Output Power 230W at
30șC)
- Ripple and Noise:
The peak to peak ripple and noise for +5V output is less
than 50mV, for +/-12V and -5V output is less than 100mV.
- Line Regulation:
The line regulation for each output is less +/-1% while
measuring at rated load and +/-10% or 115VAC or 230VAC input voltage
changing.
- Load Regulation:
The output voltage load regulation is less than the
following valuse by changing each output and +/-40% from 60% rated load,
and keep all other outputs at 60% rated load. +5V:+/-4% +12V:+/-5%
-12V:+/-2% -5V:+/-2%
- Hold Up Time:
>16ms
- Power Good Signal:
Go high 100ms to 500ms after all output DC Voltages are within regulation
limits.
- Efficiency:
70% typical
- Output protection:
Over Voltage Protection and Short Protection
- Operating Temperature :
0 ~ 50șC (derating about 20% form 30oC to 50șC)
- Storage Temperature :
-40 ~ 85șC
- Cooling: Cooling with a 42CFM
forced air
- MTBF:
176,530Hrs
- Safety Standards:
UL 1950; CSA22.2 No. 234; EN 60950
- EMI Standard:
ECC docket 20780 curve "B" ; N55022 class "B"
- Connectors:
DIN 41612 C96
- Pin Assignment:
|
|
- ACEC232
PS/2 Size 230W Redundant Power Supply, includes two ACER23A
- ACER23A
230W Redundant Power Module
|
E-Mail
