- Input Table :
- Output Table : (at 50oC)
- Inrush Current
- ACE932T : Less than 5A@-48V DC
- ACE925T : Less than 5A@-48V DC
- ACE925C : Less than 5A@+24V DC
- ACE916V : Less than 10A@+12V DC
- Ripple and Noise :
Less than 1% of each output at rated load
- Line Regulation :
The line regulation for each outputs are less than 1%
- Load Regulation :
- Efficiency :
Higher than 65%
- Altitude :
0 ~ 15,000ft
- Protection :
- Over voltage protection. The trip point is around 5.7V ~ 7.0V output
- Short circuit and overload
- Thermal Protection : Built-in 110+/-5șC thermal switch in HS1
- Vibration :
10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
- Impact :
10G for 20ms once on each X, Y and Z axis
- MTBF :
- ACE932T : 141,000 Hours
- ACE925T : 198,500 Hours
- ACE925C : 206,000 Hours
- ACE916V : 202,500 Hours
|
|
   
- Safety :
Meets UL 1950; CSA 22.2 No. 234, VDE EN 60950
- EMI :
Meets FCC docket 20780 curve "B", EN55022 class "B"
- Built-in cooling fan
- Operating Temperature :
-20șC ~ 70șC
(Derating curve will occur 50șC ~ 70șC)
- Storage Temperature : -40șC~
75șC
- Built-in ball bearing cooling fan
- Extra P10 (+5V) connector for most
high-power requirement (ACE932T)
- ACE932T
300W -48V DC input PS/2 type power supply
- ACE925P
250W 110V DC input PS/2 type power supply
- ACE925T
250W -48V DC input PS/2 type power supply
- ACE925C
250W +24V DC input PS/2 type power supply
- ACE916V
160W +12V DC input PS/2 type power supply
|
E-Mail
