- Input Table :
- Output Table (at 50oC) :
- Inrush Current (ACE716A/716AP)
: Not exceed 15A@115V AC or 30A@230V AC
- Ripple and Noise :
Less than 100mV
- Line Regulation :
The line regulation for each outputs are less than +/-1%,
while measuring at rated loading and +/-10% of input voltage changing
- Load Regulation :
- ACE716A/716AP : Less than +/-3%@+/-5V and -12V, +/-6%@+12V
- ACE716T/C : Less than +/-1%@+/-5V and -12V, +/-4%@+12V
- Efficiency :
- ACE716A/716AP : Higher than 75%
- ACE716T/C : Higher than 70%
- Hold-up Time (ACE716A/716AP) :
20ms (typical)@115V AC
- Altitude :
0 ~ 10,000ft
- Protection :
Over voltage protection. The trip point is around 5.9V ~
7.0V output
- Thermal Protection :
Built in 110?oC thermal switch in HS1
- Vibration :
10 ~ 55Hz at 2G 3min. period, 30 min. along X, Y and Z axis
- Impact :
10G for 20ms once on each X, Y and Z axis
- Hi-pot isolation :
- 4300V DC, input to output for one minute
- 2200V DC, input to ground for one minute
- MTBF :
- ACE716A : 188,800 hours
- ACE716T : 212,050 hours
- ACE716C : 187,490 hours
- Safety :
Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN 60950
- EMI :
- Meets FCC docket 20780 curve "A", EN50081-2 : CISPR22 "A"
- Harmonic EN 61000-3-2 for ACE716AP
- EMS Standard (Designed to meet the
following limits) :
- EN 50082-2
- IEC 801-1 8KV (Air Discharge) criteria B (ACE716A/716AP)
- IEC 801-3, 10V/M criteria A
- IEC 801-4, 2KV criteria B (ACE716A/716AP)
- IEC 801-5, 2KV criteria B (ACE716A/716AP)
- Built-in cooling fan
|
|
- Operating Temperature :
-20șC ~ 70șC
(Derating curve will occur 50șC ~ 70șC)
- Storage Temperature :
-20șC ~ 85șC
- Dimensions :
97(W) x 40.5(H) x 198(D)mm; (3.8" x 1.6" x 7.8")
- ACE716AP
Rugged AC input 150W PFC power supply
- ACE716A
Rugged AC input 150W power supply
- ACE716T
Rugged 48V DC input 150W power supply
- ACE716C
Rugged 24V DC input 150W power supply
|
E-Mail
