|
| |
| PPAP200 |
|
|
Advanced
Communication Appliance System Board
 |
|
|
 |
| |
-
Scalable
computing power from Celeron to Pentium III processors to
provide a wide range of price/performance selections
-
Adopt
Intel's new generation 815E chipset
-
Three
on-board 10/100 Ethernet ports
-
Tailor-made
BIOS allows users to operate it as a communication device
instead of a computer system
-
BIOS
can be operated via SIO port
-
DOM
supported for embedded application
-
Eight
application definable LEDs
|
|
| |
|
|
|
|
PPAP200 is a communication appliance computing board
based on Intel's next generation chipset technology.
PPAP200 has three on-board LAN ports to serve as a
communication appliance, such as Firewall, which needs
three LAN ports to connect external network (internet),
demilitarized zone and internal network. Different I/O
management policies can be applied respectively to
|
individual network to achieve the highest security
level. One built-in PCI slot permits further expansion
for WAN connection, backup connection or even customized
function card. The target market segment is
communication appliance, including Virtual Private
Network, Load Balancing, Quality Of Service, Intrusion
detection, Virus detection, Firewall and Voice Over IP.
|
 |
|
|
|
|
-
Scalable
computing power from Intel® Celeron™
to Pentium® lII processor in the FC-PGA
socket to provide a wide range of price/performance
selections
-
Adopt
Intel's new generation 815E chipset, which offers
the highest performance, reliability and stability
for the communication appliance:
- Support 66/100/133 MHz FSB speed
- Support up to 512MB of PC100/133 SDRAM
- ATA-100 IDE for storage device
- USB
-
Three
on-board 10/100 Ethernet ports for advanced
communication appliances, such as Firewalls (one
external network, demilitarized zone with internal
network is a typical configuration for firewall
application)
-
Tailor-made
BIOS allows users to operate it as a network device
instead of a computer system. BIOS can be operated
via serial port
-
Two
serial (EIA-232) ports for local maintenance and
interface to those peripherals such as LCD/keypad
module
-
DOM
supported for embedded application
-
DC
input jack is used to connect external AC/DC
adapter. An on-board power connector provides
necessary power source to system HDDs and fans
-
PCI
golden finger edge connector allows further system
expansion
-
Eight
application definable LEDs
-
Right-angle
PCI connector permits standard PCI cards to be added
while maintaining small form factor
(8.5"x5.12")
|
|
|
|
|
|
|
General
CPU
-
Intel
Celeron or Pentium III processors
-
CPU bus frequency:
66/100/133 MHz
-
CPU core/bus clock
ratio: x2 to x8
-
Standard socket 370
for PPGA370 and FC-PGA370 processor
Chipset
Memory
-
One built-in 144-pin
SODIMM socket to support PC133/PC100 SDRAM up to
256MB memory size (no ECC and registered DIMM
support)
L2 Cache Memory
-
128KB L2 cache built in
Celeron and 256KB in Pentium III processor
BIOS
-
Award system BIOS with
4MB Firmware Hub to support DMI, PnP and APM
LAN
-
Built-in two Intel®
82559ER and one Intel® 82801BA
(w/82562ET) LAN ports
Expansion Support
-
One PCI connector for
expansion
PCI IDE Interface
-
Support two enhanced
IDE ports up to four HDD devices with PIO mode 4,
Ultra DMA/33/66/100 mode transfer and Bus Master
feature
On-Board I/O
-
Two USB and two SIO
ports
Serial Ports
-
Support two high-speed
16C550 compatible UARTs with 16-byte T/R FIFOs
Parallel Port
-
Support one parallel
port with SPP, EPP and ECP modes
On-board VGA connector
-
Intel 82815 GMCH
integrated graphics controller
External Power Connector
-
Support one standard
5.25" disk drive power connectors to provide
power source for system HDDs
USB Interface
-
Support two USB ports
for high speed I/O peripheral devices
Auxiliary I/O Interfaces
Floppy Drive Interface
-
Support one FDD port up
to two floppy drives and 5.25" (360K, 1.2MB),
3.5" (720K, 1.2MB, 1.44MB, 2.88MB) diskette
format and 3-mode FDD
Application LEDs
-
Eight application
definable LEDs
Real Time Clock/Calendar (RTC)
-
Support Y2K real time
clock/calendar with battery backup for 7-year data
retention
CPU and System Cooling Fans
-
Support three 3-pin
headers; one for CPU and two for system fans
On-board Ethernet
-
Support three Ethernet
ports utilizing two Intel® 82559 ER Fast
Ethernet controller and Intel 82801BA ICH2
integrated LAN controller to support RJ-45 interface
at 10/100 Base-T speed
Hardware Monitor
Support on-board hardware monitor
for
Power Good
-
On-board power good
generator with reset time, 300ms ~ 500ms
Physical and Environmental Requirements
-
Outline
Dimension: 130(W) x 216(L) mm; 5.12"(W) x
8.5"(L)
-
Operating Temperature:
5 to 45ºC (41 to 113ºF), 20-90%RH
-
Storage Temperature: 5
to 70ºC, 5-95%RH
-
Relative Humidity: 5%
to 95%, non-condensing
|
*
Specifications are subject to change without notice.
* Pentium III is a registered trademark of Intel
Corporation.
* Celeron is a trademark of Intel Corporation.
* Other trademarks, logos, brands and company names are
the property of their respective owners. |
|
|
|
|
|
|
PPAP200
-
Advanced communication
appliance system board based on Intel 815E chipset
with three 10/100 Base-T Ethernet ports
|
|
|
|
|
Related