|
Home
Up
Industrial Products
Request a Catalog
Request a Brochure
Request a Price
Search
Support & Service
Industrial Ethernet Products
Industrial Communication Gateways
Single Port Serial Device Servers
Multiport Serial Device Servers
Multiport Serial Boards
USB-to-Serial Hubs
Media Converters
Console Servers
Multiport Sync Boards
Serial Comm Development Tool
Internet Communication Devices
Accessories
Board
Ordering Information
| |
Media Converters
 |
|
Detailed Info
|
RS-232 to RS-422/485 Converters
Isolated RS-232 to RS-485/422 Converter
-
RS-232 to RS-422 conversion with RTS/CTS support
-
RS-232 to 2/4-Wire RS-485 conversion
-
Isolation Protection, 2 KV (TCC-100I) for both
RS-422/485 signals and power
-
Wall and DIN-Rail mountable
-
Plug-in screw terminal Block for easy 422/485
wiring
-
PWR, Tx, and Rx LEDs
-
Surge protection, 16 KV ESD
-
Operating Temperature from -20°C to 60°C
|
|
|
|
Detailed Info
|
RS-422/485 Repeater
Isolated RS-485/422 Repeater
-
Boost serial signal for extending transmission
distance
-
Wall or DIN-Rail mountable
-
Terminal block for easy wiring
-
Power input from terminal block
-
DIP Switch enabled built-in terminator (120 ohms)
-
PWR, Tx, Rx LEDs
-
Embedded Surge protection (16 KV ESD)
-
Isolation: 2 KV (TCC-120I)
|
|
|
|
Detailed Info
|
Serial to Fiber
Converters
RS-232 or 3-in-1 RS-232/422/485 to ST Fiber
Media Converter
-
Extend RS-232/422/485 transmission distance up
to 20 km
-
Convert RS-232/422/485 signal to ST multi-mode
fiber
-
Plug & Play
-
Compact size
-
Decrease signal interference
-
Protect against electronic degradation/chemical
corrosion
-
Speed up to 115.2 Kbps for RS-232 and 500 Kbps
for RS-422/485
|
|
|
Ethernet to
Fiber Converters
10/100BaseT(X) to 100BaseFX Single-Strand
Fiber Converter
- Single-Strand Fiber Converters allow transmission
and receiving over single strand fiber with WDM technology
- Media Conversion between 10/100BaseT(X) and
100BaseFX
- Supports 10/100BaseT(X) auto-negotiation
- Select TP port's cable connection by DIP Switch
|
|
Isolation: Eliminate Ground Loops!
A common problem in many industrial applications is
ground loop currents that flow through the ground line when ground
voltage levels differ between connected devices. Moxa's Industrial
boards and full function converters are available with Optical Isolation
up to 2000V to eliminate this problem.
|
|
 |
Back to top |
|
