|
Home
Up
Industrial Products
Request a Catalog
Request a Brochure
Request a Price
Search
Support & Service
CP-132
CP-114
CT-114I
Board
Ordering Information
| |
|
Industio CP-132 Series |
|
|
2 Port RS-422/485 Industrial Communication PCI Board |
Overview
|
|
|
The Industio CP-132 series is designed for
RS-422/485 industrial communication. It supports 2 independent RS-422
or RS-485 ports, with each port able to control up to 32 devices in a
multidrop environment.
By using ADDC (Automatic Data Direction
Control) intelligence, applications can easily manage the half-duplex
RS-485 port's data transmitting and receiving without the need for
extra code. In addition, on-chip hardware flow control and built-in
termination resistors guarantee data integrity, and the optical
isolation and surge protection options are also available to deliver
high reliability. All of the above attributes make the CP-132 series
suitable for harsh industrial applications. |
 |
Features
|
|
|
- Available with optical isolation and
surge protection as options
- Supports ADDC (Automatic Data
Direction Control) intelligence
- RS-485 data control: auto or by RTS
- Built-in termination resistors
- On-chip hardware flow control
- Low repair rate with ASIC design
- Works perfectly with all major
Operating Systems
|
Benefits
|
|
|
- High reliability in harsh industrial
environments
- ADDC intelligence simplifies RS-485
software programming, reducing development time and cost
|
Applications
|
|
|
- Multipoint data acquisition
- Industrial control
- Factory automation
- Embedded industrial machines
- Remote serial device control
- SCADA systems
|
Specifications
Hardware
|
I/O controller |
16C550C or compatible x 2, each with a 16
byte Tx/Rx FIFO |
|
Connector type |
Male DB9 |
Interface
|
Bus |
PCI ver. 2.1 (32 bit) |
|
Serial |
RS-422/485 |
|
No. of ports |
2 |
|
Signals |
RS-422: TxD+/-, RxD+/-, RTS+/-, CTS+/-,
GND
RS-485: Data+/-, GND |
|
RS-485 data control |
Auto ADDC or by RTS |
|
Built-in termination resistor |
RS-422: 120 Ohm
RS-485: 120 Ohm, jumper enabled/disable |
Performance
|
Speed |
50 bps – 921.6 Kbps |
|
Max. no. of ports |
8 (4 boards) |
Configuration
|
Parity |
None, even, odd, space, mark |
|
Data bits |
5, 6, 7, 8 |
|
Stop bits |
1, 1.5, 2 |
|
IRQ |
Assigned by BIOS |
|
I/O address |
Assigned by BIOS |
OS supported
|
CP-132 |
Windows XP, Windows 2000, Windows NT,
Windows 95/98/ME, DOS, Linux 2.0.x (Intel x86), Linux 2.0.x (Alpha),
Linux 2.2.x (Intel x86), Linux 2.2.x (Alpha), Linux 2.4.x (Intel x86) |
Power and Environment
|
Power requirements |
CP-132: 430 mA max. (+5V)
CP-132S: 430 mA max. (+5V)
CP-132I: 700 mA max. (+5V)
CP-132IS: 700 mA max. (+5V) |
|
Operating Temp. |
0 – 55°C |
|
Operating Humidity |
5 – 95%RH |
|
Storage Temp. |
-20 – 85°C |
|
Dimensions |
CP-132: 120 x 80 mm (W x D)
CP-132S: 120 x 80 mm (W x D)
CP-132I: 120 x 110 mm (W x D)
CP-132IS: 120 x 110 mm (W x D) |
|
Surge protection |
CP-132S: 25 KV ESD for serial port
CP-132IS: 25 KV ESD for serial port |
|
Isolation Protection |
CP-132I: 2 KV
CP-132IS: 2 KV |
|
Regulatory approvals |
FCC, CE |
Ordering Information
 CP-132 |
2 port RS-422/485
board |
|
CP-132S |
2 port RS-422/485
board with surge protection |
|
CP-132I |
2 port
RS-422/485 board with optical isolation |
|
CP-132IS |
2 port RS-422/485
board with optical isolation and surge protection |
|
All items include |
MOXA software CD-ROM: contains drivers
and MOXA PComm Lite serial comm development tool
User's Manual
|
|
|
