|
Home
Up
Search
Industrial Products
| |
| PPAP100 |
The Best
Cost-performance Rated Communication Appliance System Board
 |
|
|
 |
| |
-
Support
both ATX/AT power and AC/DC adapter
-
Eight
GPIO LEDs for customized indication
-
Support
DOC (32-pin socket) and compact flash
-
Dedicated
BIOS for the operation via SIO port
-
On-board
hardware monitoring
-
Built-in
watchdog timer
-
Linux
of different flavors support
-
Two
on-board 10/100 Ethernet port
|
|
| |
|
|
|
|
PPAP100 is a dedicated computing board for
communication appliance applications. It can be used for
entry level desk-top product which requires just two LAN
ports or for the rack-mount solution which needs at
least three or up to six LAN ports. Besides LAN ports,
various power inputs are incorporated to satisfy both
desk-top and rack-mount
|
requirements. Market segment of this product includes
security, network attached storage, web cashing, load
balancing, all-in-one devices and VOIP. Applications
have been considered since the very beginning;
therefore, PPAP100 should be the best choice of
computing board for communication appliance.
|
 |
|
|
|
|
-
Scalable
performance using Intel® Celeron™ to
Pentium® lII processor in the FC-PGA
socket to satisfy a wide range of customers
requirements
-
Based
on the most trustable Intel BX440 chipset to build
up the most reliable platform for communication
appliance. Reliability is the first concern for this
type of non-stop device
-
Two
10/100 Ethernet ports for entry level communication
appliances; up to six 10/100 Ethernet ports can be
achieved via dedicatedly designed LAN expansion card
-
Tailor-made
BIOS allows users to operate it as a network device
instead of a computer system. BIOS can be operated
via serial port
-
Two
serial (EIA-232) ports for local maintenance and
interface to those peripherals such as LCD/keypad
module
-
DiskOnChip
and CompactFlash supported to enable embedded
implementations
-
Watch-dog
timer incorporated to prevent software lockup
-
ATX
type connector and DC input jack supported: ATX/AT
power supply is for rack-mount solution and DC input
is for modEMlike housing. ATX and AT type operation
can be selected by jumper setting
|
|
|
|
|
|
|
|
General
CPU
-
Support Intel®
Socket 370 Pentium® III processor up to
850MHz and Celeron™ up to 700MHz
Chipset
Memory
-
One 144-pin SODIMM
socket up to 128MB memory size
L2 Cache Memory
-
128KB/256KB PBSRAM
built in (Celeron/Pentium III processor) CPU module
BIOS
-
Award system BIOS with
256KB Flash ROM to support DMI, PnP and Green
function
LAN
-
Two built-in Intel®
82559 10/100 BaseT Ethernet ports
Expansion Support
-
One PCI edge connector
for expansion
PCI IDE Interface
-
One
on-board DMA33 IDE channel to support two IDE
devices
-
Default support
2.5" IDE devices (3.5" IDE requires a
converting cable)
On-Board I/O
-
Two USB and two SIO
ports
Serial Ports
-
Support
two high-speed 16C550 compatible UARTs with 16-byte
T/R FIFOs
-
Support optional
LCD/Key pad module
USB Interface
-
Support two USB ports
for high speed I/O peripheral devices
Auxiliary I/O Interfaces
-
System reset switch,
Power LED, LAN activity LED, Power On/Off button and
HDD LED interface
Application LEDs
-
Eight application
definable LEDs
Watchdog Timer
-
5, 1, 2, 4, 8, 16, 32,
64 sec. time-out intervals by jumper setting or 255
intervals from 0.5 min. to 254.5 min. by software
programming
Power Inlet
-
Support
one standard 20-pin ATX power connector with power
button pin
-
Support one on-board
DC input jack
PCI Golden Finger
-
One PCI golden finger
edge connector for PCI connection
DiskOnChip
-
Reserved one 32-pin
socket for M-systems' flash disk up to 288MB
On-board Ethernet
-
Two Intel®
82559 10/100 Base-T Fast Ethernet controller with
RJ-45 interface
Hardware Monitor
Support on-board hardware monitor
for
Power Requirement
Power Good
-
On-board power good
generator with reset time, 300ms ~ 500ms
Physical and Environmental Requirements
-
Outline
Dimension: 129.3(W) x 203(L) mm
-
Operating Temperature:
5 to 45ºC (41 to 113ºF), 20-90%RH
-
Storage Temperature: 5
to 70ºC, 5-95%RH
-
Relative Humidity: 5%
to 95%, non-condensing
|
*
Specifications are subject to change without notice.
* Pentium III is a registered trademark of Intel
Corporation.
* Celeron is a trademark of Intel Corporation.
* Other trademarks, logos, brands and company names are
the property of their respective owners. |
|
|
|
|
|
|
|
PPAP100
-
The best
cost-performance communication appliance system
board
|
|
|
|
|
|
