|
Home
Up
Search
Industrial Products
| |
|
 |
Low power VIA Eden 667 MHz or Ezra 800MHz+ processor on board with
133MHz FSB |
|
VIA Apollo PLE 133 8601A/686B chipsets |
|
Max. 512MB SDRAM memory in 1 SO-DIMM slot |
|
3D/2D graphic, TMDS(DVI optional)/ TTL LCD(24-bit) interface |
|
Single ADMTek 983B 10/100 Mbps fast Ethernet LAN port |
|
AC 97 ver.2.0 Audio |
|
TV-out for option |
|
|
|
|
Form Factor
- 3.5” size drive foot print
- PCI V2.2 compliant
CPU
- On-board low power VIA Eden 667MHz processor EBGA package with 133MHz
FSB/On-board Ezra 800MHz+ processor EBGA package with 133MHz FSB.
- 128K L1 cache memory and 64KB L2 cache memory on-die
Memory
- Max. 512MB SDRAM memory, 144-pin DIMM x1
BIOS
- Award system BIOS
- APM(Advanced Power Management) support
- ACPI(Advanced Configuration & Power Interface) support
- 4M bits flash ROM
Chipset
- VIA 8601A(Twister T) 100/133MHz North Bridge
- VIA VT82C686B PCI SUPER-I/O integrate peripheral controller
- PCI V2.2 compliant
On
board VGA
- VIA 8601A Integrated Savage 4 3D/2D Video Accelerator, supports
2/4/8MB frame buffer ; High quality DVD video playback ; 3D/2D resolutions
up to 1280x1024 and 3D rendering features
- Extensive LCD support: 18- or 24-bit TFT flat panel interface,
resolutions 640x480/800x600/1024x768 ; TMDS (Panel Link) interface
(Optional), resolutions up to 1024x768.
- TV-Encoder Interface (Optional)
On
Board LAN
- ADMTek AN983B Ethernet LAN portx1
- RJ45 with LED connector x1
- Full duplex compliant with IEEE802.3X
- Boot from LAN function
- Wake-up from LAN
On-board Audio
- VT82C686B and AC97 ver. 2.0 compliant interface, Multi-stream Direct
Sound and Direct Sound 3D acceleration
On-Board I/O
- USB portx2
- Buzzerx1
- Audio Interface:
Internal - CD audio-in, Line-in, speaker-out
Phone Jack - Microphone-in, speaker-out
- Enhance IDE: Ultra DMA 33/66/100 support; 44-pin connector x2
- SIO(with 2 16C550 UARTs)x2, 9-pin headerx2
- PIO x1, 26-pin connector support EPP/ECP
- Slim FDD controller: 26-pin connectorx1
- PS/2 keyboard/Mouse: 6-pin mini DIN connector
- Digital I/O TTL level (2-in/out).
- I2C: on-board 3-pin headerx1 (one pin for GND)
- Reset SW: 2-pin headerx1
- IDE active LED: 2-pin headerx1
- ATX power SW: 2-pin headerx1
- Power cable connected to panel(5V or 3V):3-pin powerheaderx1
- 2-pin IDE Active LED headerx1
System Monitor
- Derived from super I/O support system monitor
- 4 voltage(for +3.3V, +5V, VTT, Vcore)
- Monitor CPU fan speed, CPU temperature
- Driver support: Window® 95/98/2000, Windows NT4.0
Real
time clock
- On-chip RTC back-up battery x1
- External Li-Ion batteryx1
Watchdog Timer
- Watchdog timeout programmable from 1 to 127 second/minute
On-board bus expansion
Demensions
Power requirements
- 2-pin power input connector
| PIN Define |
Voltage |
Power Requirement |
| PIN 1 |
+5V |
5A (typical) |
| PIN 2 |
GND |
- Reserve 3-pin header for 5Vsb to support ACPI function
- 3.3V is converted from +5V
- Accessory power converter cable:
AT power supply: two 4P to 2P
ATX power supply: 2-pin+ 3-pin power SW connector
Environments
- Operating temperature: 0°Cto 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90%(noncondensing)
Certification
EBC365
-
- 3.5” Embedded controller with on-board Ezra 800MHz+ processor.
-
-
EBC365LP6
- 3.5” Ultra low power embedded CPU fan-less solution with on-board
VIA Eden 667MHz processor.
|
|
|
