• Low ripple and low noise.
• High resolution and accuracy (0.1mV/0.01mA).
• Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter.
• Supporting high-accuracy and dynamic programming output.
• High-luminance VFD screen with two lines& four channels display.
• Intellegent fan system fan will be automatically initiated according to the temperature.
• Supporting remote voltage compensation and multidata storage.
• Supporting external trigger input and output.
• Power-on-self-test, software calibration and standard rack mount.
• Using standard SCPI protocol
• Communication mode: RS232/RS485/USB

• ACE-832AP-RS
• ACE-832AP-S-RS
• ACE-840A-RS
• ACE-841AP-S-RS
• ACE-850AP-RS-24
• ACE-4525AP-RS

• 19” Industrial Chassis
• Server Storage
• Controllers
• Disk Array
• Server Tower
• N+1 Redundant
• High efficiency

The 63 series of AC/DC switching mode power supplies provide 63 Watts of continuous output power. All supplies are UL94V-1 min compliant [and] include IEC-320-C14 input for worldwide applications. They are suited for use in hospital instruments and many other applications. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission limits and are designed to comply with UL/c-UL(UL 60601-1), TUV/T-mark (EN 60601-1), and new CE requirements. All units are 100% burned in and tested.

Features

• Wide Input Voltage 90 to 264 VAC, 47 to 63 Hz
• IEC-320-C14 Input Inlet
• Single Output
• Output Voltage Available from 5VDC - 36VDC
• Optional Output Connector
• Input Surge Current, Over Voltage and Over Load Protection
• Output Voltage Protection (Crowbar Design)
• Splash Proof
• Class 1
• 3 Year Warranty

Download the full Total Power TPMPU63 Datasheet.

Source: http://www.total-power.com

Hot swappable 1U 1500 Watt AC/DC power supply suits bulk power and DPA applications

XP Power announced today the GFR1K5 1500 Watt AC/DC power supply series aimed at a broad range of industrial and communications applications that require bulk power within a compact 1U enclosure. Available in four single output models covering the nominal output voltages of +12, +24, + 48 or +56 VDC, the units can be mounted within a standard 1U height equipment rack. An optional rack mount enclosure is also available that allows up to 4 GFR1K5 units to be mounted side by side providing up to 6kW output. All units can be hot swapped and used in redundant configurations.

All voltage models have the same form factor and interconnection for applications that require more than one voltage rail, with the units being electrically polarised to prevent inserting in the wrong backplane position.

The mechanical design of the GFR1K5 includes a number of innovative design features, such as using only two internal PCBs, that aids the optimal flow of air through the unit, helping to maintain a low internal operating temperature ensuring long-term component reliability. The use of a dual stage power factor correction (PFC) circuit and synchronous rectification techniques contribute to the units 90%+ power efficiency.

Everything in today's world of computerized technologies requires power, and the power supplies that keep all of our equipment up and running deserve the same care and maintenance that we give to the essential operating machinery. Unfortunately, faulty power supplies are often thrown out and replaced, but what if there isn't a replacement?

That's where Vox Technologies' new Power Supply Repair & Service program comes in. We fix it, then we work with you to customize a VoxShield Service Program that covers future repairs and service. You can choose to have us available for expedited service, provide a spare in case of an accident, etc - the service plan is completely customizable to any situation or budget.

Features

• Full repair service for any and all power supplies
• Fully customizeable warranty & service plan

Contact Us today to take advantage of this new Power Supply Repair and Service Program.

We also specialize in locating and getting our hands on hard to find equipment, so we can likely find a power supply replacement for your broken or malfunctioning equipment. Simply give us a call with the model or part number and we will do our best to find the power supply you need.