Axiomtek recently released the iCON-83000 Series of Hardened Ethernet Switches. Compliant with IEC61850-3 & IEEE1613 environmental requirements and featuring a recovery time of less than 15ms., this hardened ethernet switch is ideally suited to industrial automation applications.

Features:

• Complies with IEC61850-3 & IEEE1613 environmental requirements for power substation automation systems
• Complies with EN50121-4 environmental requirement for railway application
• Complies with IEC61000-6-2 EMC generic standard immunity for industrial environment
• Proprietary "a-ring" support for network redundancy; recovery time <15ms
• IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
• IP multicast filtering through IGMP snooping V1, V2 & V3 Supports port-based VLAN and IEEE802.1Q
• VLAN tagging and GVRP IEEE802.1p QoS with four priority queues MAC-based trunking with automatic link fail-over RS-232 console, Telnet, SSL/SSH, SNMP V1& V2c & V3, RMON, Web browser, and TFTP management
• Supports command line interface in RS-232 console
• Supports IEEE802.1x security
• Bandwidth rate control
• Per-port programmable MAC address locking
• Up to 24 static secure MAC addresses per port
• Port mirroring
• 1000Mbps-full-duplex, 10/100Mbps-full/half-duplex,
• Auto-negotiation, auto-MDI/MDIX
• Full wire-speed forwarding rate
• Alarms for power and port link failure by relay output
• Redundant power inputs with terminal block and DC jack
• 40°C to +75°C (-40°F to +167°F) operating temperature range
• Supports NTP

Source: Axiomtek

Advantech recently unveiled the EKI-1221D 1-port Modbus Gateway. Featuring two ethernet ports and support for ethernet auto-bypass, this modbus gateway is prepared for a wide variety of applications.

Features:

• Provides 2 x 10/100 Mbps Ethernet ports for Daisy Chian connectivity
• Integration of Modbus TCP and Modbus RTU/ASCII networks
• Supports Ethernet auto-bypass function
• Master mode supports 32 TCP slaves at the same time
• Slave mode supports up to 16 TCP masters
• Supports mapping Modbus slave ID option
• Auto searching Modbus slave ID over configuration utility
• Mounts on DIN-rail, wall or panel
• Class I, Division 2 certification

Source: Advantech

See Also: Advantech EKI-1222D

Advantech recently announced the launch of the ADAM-6100 Series, four EtherNet/IP-based remote I/O Modules. Very resistant to field interference and featuring the EtherNet/IP protocol, these modules are prepared for many different applications.

Part Numbers: ADAM-6150EI, ADAM-6151EI, ADAM-6156EI, ADAM-6160EI

Source: Advantech

Interface Masters recently unveiled the NIAGARA 3213 Link Aggregation Active TAP System. Capable of monitoring a network segment at 10 gigabit speeds and featuring an active TAP system, this system is versatile and ready for many different applications.

Features:

• One Segment of Link Aggregation TAP
• Passive TAP for non-intrusive visibility into bi-directional traffic
• Split TAP and Link aggregation TAP support
• Packet Injection capabilities
• Passive Bypass which is essential during power loss
• 10 Gigabit Multi Mode (SR) and Single mode (LR) support
• Internal redundant power supplies for maximum reliability
• Dedicated Management Port and Console Port
• Extensive CLI and WEB based management
• SSH and HTTPS for secure Management
• TACACS+ authentication
• Syslog support
• NTP and Time Zone

Source: Interface Masters